Their assessment found that these harnesses may present a non-conformity which cannot be detected by the test requested in our previous call for inspection. This non-conformity, combined with a specific use involving high lateral stress on the attachment point, leads to premature wear of the screws.

This wear can cause the ventral D-ring’s pin to release, and the attachment point to open, which could lead to serious injury or death.

We ask that you replace the metal D-ring and the screws on the gated ventral attachment point (using the replacement kit made available to you).

Am I affected by this safety alert?

All ASTRO and CANYON GUIDE harnesses with serial numbers below 23J 9999999 999 are affected by this replacement (same scope as the harnesses covered by our 2023 call for inspection).
NB : The latest versions of the ASTRO and ASTRO SIT, sold since February 2025, are not affected by this safety alert.

To check whether you are affected by this replacement, use the link here.

How can I get a replacement kit?

Contact your local Petzl after-sales service via the after-sales service section of the contact form to get a replacement kit (D-ring and screws) suitable for the gated ventral attachment point of your harness. The kit will be sent to you free of charge, with the associated installation instructions.

Further details including
1. Wether you can continue to temporarily use your harness before replacing the D and screws
2. Where to find your serial number
3. How long it takes to get a replacement kit
4. What you should do as a reseller

along with other FAQs can be found here