ANSI E1.27 – 2 – 2026, Recommended Practice for Permanently Installed Control Cables for Use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products

This standard addresses requirements for permanently installed cables carrying ANSI E1.11 and USITT DMX512 control signals. 

ANSI E1.37-4 – 2026, Remote Device Management over DMX512 Networks – File Transfer Control with Firmware Upload capabilities

This document establishes the minimum requirements for [RDM] Controllers and [RDM] Responders to successfully support File Transfer Control (FTC) between them. It specifically provides a transfer mechanism that can be applied to memory limited Responders with transmit and receive buffers as small as 64 bytes, while allowing scalable improvements (a net reduction) in transfer times for Responders that have larger buffers.

ANSI E1.62 – 2021 (R2026), Minimum specifications for mass-produced portable platforms, ramps, stairs, and choral risers for live performance events

This standard addresses requirements for mass-produced portable platforms, stair units ramps, and choral risers used for events such as live drama, musicals, fashion shows, and concerts. It also covers railings provided as fall protection accessories for these units. It gives minimum payload and sideways force handling specifications. Custom platforms or complete stage systems are outside its scope.  

ANSI E1.66 – 2026, Safety Standard for Followspot Positions Erected for Short-term Use in Entertainment Venues

This standard addresses safety requirements for followspot positions in or on structures erected for short-term use, and positions not covered by ANSI E1.28. It is applicable to followspot positions indoors and outdoors. It addresses structural, electrical, and personnel safety requirements associated with non-permanent followspot positions. 

ANSI ES1.5 – 2026, Event Safety – Medical Preparedness

The latest publication in the Event Safety series, this standard provides guidance to assist in mitigating reasonably foreseeable physical and psychological health and safety hazards at events. It includes guidance on how to plan and provide medical support services, from initial setup to final disassembly of the event. 

One standard now in limited public review

E1.51 – 2024, The selection, Installation, and use of Single-conductor Portable Power Feeder Cable Systems for use at 600 Volts Nominal or less, for the Distribution of Electrical Energy in the Television, Film, Live Performance and Event industries in Canada

is now in limited, 30-day public review. Sections 2.2 and 4.2 have been revised, and the review considers only those revisions. Download the public review documents at https://tsp.esta.org/tsp/documents/public_review_docs.php, and return any comments before the review period ends on 10 August 2026.