Seasonal Stage Pyrotechnics: An Aid to using Stage Pyrotechnics safely.
15 December 2021
If you are a technician about to start setting off stage pyrotechnics ask yourself, when was the last time you had to do this? Even if you’re ‘trained’ it might have been some years ago and skills fade. So, this is gentle ‘aide memoire’ to literally save your skin.
With very few exceptions, all stage pyrotechnics rely on the ignition of a continuous chemical combustion. This can either be spontaneous or over a longer period. Many stage pyrotechnics also produce large amounts of oxygen to create the pyrotechnic effect and therefore, once ignited, they cannot be extinguished. They will continue to burn until exhausted, even underwater.
The deciding factor when planning the use of stage pyrotechnics is safety. This must be given priority over every other aspect. Consider these main ways of ensuring safety:-
- The devices must be designed and manufactured so that no risk is taken if used correctly, i.e. they function as intended, produce the desired effect, and produce the desired effect safely time after time. Remember pyrotechnics, like Stage Gerbs, come in different effect sizes – don’t assume a bigger effect will look better. It may burn your header or an overhead cloth.
- The devices must be fired via a control system that has been manufactured with adequate safety features built in, both electrical and mechanical. Be careful of using tie lines – you never know what stray voltage may be lurking there. It only takes a small amount of current (from comms or a cue light) to ignite a pyrotechnic!
- The user, i.e. the operator, should have enough experience and knowledge to ensure that, not only are the effects used correctly and safely to produce the effect required, but that they can cope with any unforeseen circumstances, i.e. they are competent users. Call me old fashioned but before loading the pod the holder should always be disconnected from its extension cable. I know of a number of technicians who have had their faces and hands burnt when plugging up through phantom firing and forget to remove or isolate the circuit! Don’t rely on the key alone. Recharging your pods during a matinee is the most challenging time – rushing around resetting – when show times are close to each other.
- The Firing control systems must be specifically designed for pyrotechnics. A minimum of three safety features should be incorporated before detonation of a device is possible. A key operated, power isolation switch, channel selection switch and a shrouded fire button. The key must always be kept with the person responsible for the pyrotechnics. It is only inserted when devices are to be fired. Never use the mains, all manufactured controllers today incorporate step down transformers.
- The golden rule on the positioning of controllers is that the operator must have a clear line of sight to all devices that are to be fired. For this reason, pyro operators are usually very close to the stage. The operator must be able to see all devices clearly and warn absent-minded personnel that pyro is to be fired. Maroon effects, for example, are usually set backstage.
- Ensure every member of the cast and stage crew rehearse with any pyro effect. Everyone should know exactly what to expect when a stage pyrotechnic is fired. Always have a second person standing by with fire blanket & extinguisher.
If pyrotechnics are called for in your production, amateur or professional, make sure you are competent to use them and that you have produced a suitable and sufficient risk assessment. The Association of Stage Pyrotechnicians (ASP) will help you gain the necessary skill and experience and they will keep you up to date on the latest courses and on legislation.
Complements of the season and keep safe.
ABTT Training Co-ordinator.